Xerox Phaser 6010 用户指南

Troubleshooting

Phaser 6000/6010 Color Printer
User Guide

54

Manual Color Registration With the Printer Setting Utility 

You can fine-tune color registration by performing a manual adjustment. Manual color registration 
adjustment is a three-step process:
1.

2.

3.

1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser 6000/6010 > 

Printer Setting Utility.

2. Click the Printer Maintenance tab, then select Color Registration Adjustment from the list.
3. Click the Start button next to Print Color Regi Chart. The Color Registration Chart prints.
4. Continue to 

on page 54 to determine if an adjustment is 

necessary.

The Color Registration Chart shows horizontal and vertical values for each color. The color registration 
marks are grouped on the chart as follows:

Vertical registration values are at the top of the page:
•

Y = Paper feed direction yellow

•

M = Paper feed direction magenta

•

C = Paper feed direction cyan

Left side registration values are on the left side of the page:
•

LY  =  Left  yellow

•

LM  =  Left  magenta

•

LC = Left cyan

Right side registration values are on the right side of the page:
•

RY = Right yellow

•

RM = Right magenta

•

RC = Right cyan

To determine the vertical values:
1. In the upper section of the Color Registration Chart, vertical color lines are printed in gaps between 

corresponding vertical black lines. The line sets are in color groups: Y, M, or C. Each set of lines has a 
corresponding number printed above it. In each color group, identify the set of lines in which the 
color line is perfectly aligned between the corresponding black lines. Refer to the enlarged 
illustration on the chart that shows how to determine the closest number.

2. For each color, do one of the following:

•

If zero (0) is the value on the color set that is most closely aligned, you do not need to adjust 
that color.