Xerox Phaser 4400 产品宣传页
Paper Jams
Phaser™ 4400 Laser Printer
6
Paper size jam
1.
Load any tray with the paper size needed for printing the job. Check that the paper size and length
guides in the tray are adjusted against the paper stack. Make sure that the size menus for the
Multi-Purpose Tray and the envelope feeder (if present) are set correctly.
guides in the tray are adjusted against the paper stack. Make sure that the size menus for the
Multi-Purpose Tray and the envelope feeder (if present) are set correctly.
2.
Go behind the printer, squeeze the latch on the upper left corner of the rear cover and pull the
cover open.
cover open.
3.
Inspect for jammed paper. If visible, carefully pull out paper.
Warning
The fuser is hot. Be careful not to touch it to prevent burns.
4.
Close the printer’s rear cover.
P4400-41
P4400-42
P4400-43