Xerox Phaser 750 安装指南

5.

Fill in the fields (refer to the following table).  To process the information, press Enter. 
Make sure that SMIT finishes with an OK in the upper-left corner. To return to the first 
Printer/Plotter Devices

 menu, press F3.               

Hewlett-Packard HP-UX 9.x and 10.x

Log in as root on your workstation.

2.

Make a backup copy of the /etc/hosts file.   

3.

Edit /etc/hosts and add a line that defines the printer's IP address and its remote machine 
name.         

4.

Use the HP System Administrator Manager program (SAM) to configure an HP 
workstation.  From the command line, type: sam.

Attachment Type

Select remote.

Type of Remote Printing

Select Local  filtering before sending to 
print server.

Remote Printer Type

Select Other, then generic.

Name of NEW print queues to add

Use the down-arrow key to move down to 

PostScript, then enter the print queue name 
on the right side. This can be anything.

HOSTNAME of remote server

The name that you entered in your 
/etc/hosts file as the remote machine name.

Name of QUEUE on remote server

Queue name that the printer recognizes:

■

PS for PostScript

■

PCL for text

■

HPGL for  HP7475A 

■

AUTO for automatic selection.

TYPE of print spooler on remote 
server

Press F4 and select BSD.

Send PASS-THROUGH FLAG to 
queue on remote server?

Select F4 and select no.

Note

You need superuser privileges to edit this file.

The IP address you enter here for the printer must be the same address you 
specified as the Tektronix printer IP address when you configured the printer.  
For example:

In this example, 192.1.1.2 is the printer's IP address and tekphaser is the printer's 
remote system name.