Xerox Phaser 750 安装指南
PhaserShare Networking Manual
33
TCP/IP Host Configuration (UNIX)
IRIX 6.x with Impressario Server
The following procedure describes how to use the SGI Printer Manager program to
configure a workstation running IRIX 6.x with Impressario Server to support a color
PostScript printer.
configure a workstation running IRIX 6.x with Impressario Server to support a color
PostScript printer.
1.
From the Toolchest, click System/Printer Manager, or type printers at the command
line.
line.
2.
Click Printer and select Add from the pull-down menu.
3.
Fill in the fields (refer to the following table). Click OK.
IBM AIX 3.x and 4.x
Modify the /etc/hosts file to identify the printer to the workstation:
1.
Log onto your system as root.
2.
Make a backup copy of the /etc/hosts file.
3.
Edit /etc/hosts and add a line that defines the printer’s IP address and its name. The IP
address you enter here for the printer must be the same address you specified as the
printer's IP address when it was configured. The name is the name by which your
workstation identifies the printer.
address you enter here for the printer must be the same address you specified as the
printer's IP address when it was configured. The name is the name by which your
workstation identifies the printer.
Field name
Description
New Printer Name
Name of the print queue (this can be anything).
Printer Connected To
Select Local Host.
Location Code
Optional; may contain information describing
the location of the printer.
the location of the printer.
Location Description
Optional; may contain information describing
the location of the printer.
the location of the printer.
Printer Type
Select one of the Generic Color PostScript
entries.
entries.
Printer is Attached to
Select Network.
Printer's Name (or IP Address)
The name that you entered in your /etc/hosts file
as the remote machine name.
Printer is Attached to Network With
Network card Installed in printer.
Note
You need superuser privileges to edit this file.