Xerox Phaser 750 安装指南

TCP/IP Configuration (OS/2 Warp/LAN 

Server)

The PhaserShare TCP/IP interface is compatible with these environments:

■

OS/2 Warp with TCP/IP V2.0 for OS/2 

■

LAN Server 3.0 or later with the TCP/IP Application Kit.

Before you begin, connect the printer to the network.

Setting the printer’s IP addressing parameters

For information on setting the printer’s IP addressing parameters, see your printer’s 
networking setup guide and Setting IP addressing: PostScript utility file (UNIX only) on 
page 10.

IBM TCP/IP Version 2.0 for OS/2 includes BOOTP support.  Refer to your TCP/IP 
documentation for installing and configuring BOOTP on a PC.   

Note

In the OS/2 Warp environment, the OS/2 boot server and the printer must be on 
the same Token Ring.

Edit the hosts file to create an entry that identifies the printer’s IP address and the printer 
object name (to be assigned in the next topic).  The hosts file is in C:\TCPIP\ETC.

Creating an LPR queue in OS/2 Warp Connect 
(direct LPR connection to the printer)

OS/2 Warp Connect allows you to print directly to Tektronix printers via LPR (no server). 

Note

It is important that LPRPORTD.EXE and LPD.EXE be running in the background.  
You can set these to run automatically from the Autostart tab of the TCP/IP 
Configuration dialog box.

Create a Printer Object.  To do this, use the right mouse button to drag the Printer 
template from the Templates folder to the desktop; this displays the Create a Printer 
dialog box.

2.

In the Create Printer dialog box, enter the name of the printer.