Xerox Phaser 750 安装指南
PhaserShare Networking Manual
39
TCP/IP Configuration (OS/2 Warp/LAN Server)
3.
If the driver is already installed, select the appropriate driver; if the driver is not
installed, you must install it:
installed, you must install it:
a.
Click Install new printer driver; this displays the Install new printer driver
dialog box.
dialog box.
b.
In the Printer Driver Selection section, select Other OS/2 printer driver, then
specify the path to the driver. For example:
specify the path to the driver. For example:
c.
Click Refresh, then select the new driver from the list. Click Install and follow
the on-screen prompts.
the on-screen prompts.
4.
Click the right mouse button on an available Pipe port (0 through 7) and select Settings
from the menu; the Settings dialog box is displayed. If ports are not selectable or are
unavailable, follow these steps:
from the menu; the Settings dialog box is displayed. If ports are not selectable or are
unavailable, follow these steps:
a.
Select Install Ports from Settings and enter C:\TCPIP\DLL where appropriate.
You will only have to do this if no printers were specified when TCP/IP was
installed.
You will only have to do this if no printers were specified when TCP/IP was
installed.
b.
This is where the ports that were not available can be selected: Lpt1-3, Com 1-4,
and Pipe 0-7.
and Pipe 0-7.
c.
Once ports are installed, select a Pipe, such as Pipe 1, then double-click this port.
5.
In the Print Destination section, make the following entries:
■
LPD server. The printer’s IP address.
■
LPD printer. The printer’s name. The printer’s name should be either PS or
AUTO in uppercase letters. It is recommended that you leave everything else
blank.
AUTO in uppercase letters. It is recommended that you leave everything else
blank.
To return to the Create Printer dialog box, click OK; then click Create.
6.
Set the printer as your default printer:
a.
Click the right mouse button on the printer object.
b.
Click Set default, then select the new printer object.
OS/2 client-to-server setup
1.
Create a network printer object:use the right mouse button to drag the Network
Printer template from the Templates folder; the Access another network printer
dialog box is displayed.
Printer template from the Templates folder; the Access another network printer
dialog box is displayed.
2.
In the Access another network printer dialog box, make the following selections from
the list boxes:
the list boxes:
■
Network. Network protocol.
■
Server. Name of the server for the queue.
■
Resource. Name of the queue.
3.
Click OK; this creates a network printer object.
4.
Click the right mouse button on the network printer icon and select Settings from the
menu; this displays the Settings dialog box.
menu; this displays the Settings dialog box.
d:\os2drv