Xerox Phaser 790 用户指南
11. Installing user software in a Windows NT 4.0 environment
Xerox Phaser 790
11–2
Overview of installation
Installing the Phaser 790 user software includes the following:
•
Installing the PostScript or PCL printer driver and corresponding
printer description files and setting up the printer driver to
communicate with the printer through the Add Printer Wizard
communicate with the printer through the Add Printer Wizard
•
Setting the printer options
•
Copying additional files from the User Software CD as needed
To print from over the network from a Windows NT 4.0 workstation,
ensure the following tasks have been completed:
ensure the following tasks have been completed:
•
Set up network servers, if any.
•
Set up the printer to accept print jobs from the workstation.
•
Configure a port on each Windows NT 4.0 workstation for the
network type.
Before you begin
1.
If your system administrator has not already done so, connect the
printer to the desired port on the workstation. For details, refer to
the chapters Connecting to the network and Performing the setup
from the Printer Control Panel.
printer to the desired port on the workstation. For details, refer to
the chapters Connecting to the network and Performing the setup
from the Printer Control Panel.
If you are uncertain what type of network you have, contact your
system administrator.
system administrator.
2.
Print a configuration sheet at the printer to obtain the name of the
printer and settings that will be used in the following procedures.
printer and settings that will be used in the following procedures.