Xerox Phaser 140 用户指南
Caring for Your Printer
4
User Manual
4-9
Installing the new printhead
1.
To install the printhead, follow the steps under ÒInstalling the printheadÓ on page 2-6:
2.
After you have installed the printhead, re-install the ink cartridges
removed earlier (see ÒInstalling ink cartridgesÓ on page 2-11).
removed earlier (see ÒInstalling ink cartridgesÓ on page 2-11).
3.
Turn on the printer.
During the Þrst power-up after printhead installation, the printer purges the
ink jets. This Þrst-time printhead initialization takes a few minutes and is
executed only on the Þrst power-up after printhead installation.
ink jets. This Þrst-time printhead initialization takes a few minutes and is
executed only on the Þrst power-up after printhead installation.
Note
Do not turn off the printer during initialization. Turning off the
printer during initialization prevents it from printing properly
when it is turned on again.
printer during initialization prevents it from printing properly
when it is turned on again.
Clean the ink jets as described in the next topic.