Xerox Phaser 1235 产品宣传页

Using Printer Options

Installation Precautions

The Phaser 1235 Color Printer options are easy to install; however,  before you attempt to 
install (or remove) any printer options, please read and observe the following precautions.

Warning

TWO PEOPLE ARE REQUIRED WHEN LIFTING OR CARRYING THE PRINTER. 
The printer should always be lifted and carried by two people, as shown below. 
Exercise care in moving or relocating the printer, it is front-heavy and could tip 
forward. Follow the recommended procedure when moving the printer from one 
location to another. Refer to the Phaser 1235 Color Printer Setup Instructions.

Warning

DISCONNECT THE POWER CORD: Never remove the printer controller board 
while the printer is plugged in. To avoid the possibility of electrical shock, 
always disconnect the power cord when installing or removing ANY internal or 
external printer option.

Warning

DISCHARGE STATIC ELECTRICITY: The controller board and internal printer 
options (Hard Drive, Token Ring Card, Memory) are sensitive to static electricity. 
Before installing or removing an internal option, discharge static electricity from 
your body by touching something metal, such as the metal back plate on any 
device plugged into a grounded power source. If you walk around before 
finishing the installation, again discharge any static electricity.