Xerox Phaser 1235 产品宣传页
102
Phaser 1235 Network Color Printers
Using Printer Options
Hard Drive
Warning
DISCHARGE STATIC ELECTRICITY: The controller board and internal printer
options (Hard Drive, Token Ring Card, Memory) are sensitive to static electricity.
Before installing or removing an internal option, discharge static electricity from
your body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, again discharge any static electricity.
options (Hard Drive, Token Ring Card, Memory) are sensitive to static electricity.
Before installing or removing an internal option, discharge static electricity from
your body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, again discharge any static electricity.
If you install the optional hard drive in the printer, it will significantly increase the
amount of memory available for processing jobs and storing downloaded information
(such as fonts, forms, overlays (macros) and Secure Print and Proof Print jobs).
amount of memory available for processing jobs and storing downloaded information
(such as fonts, forms, overlays (macros) and Secure Print and Proof Print jobs).
The hard drive is used for the following:
■
Support of the PostScript file system.
■
Support of the PJL/PCL file system.
■
Support for Secure Print and Proof Print jobs.
■
Downloading fonts, forms and overlays.
■
TIFF and PDF printing
Installation
Follow this procedure to install the hard drive.
1
Turn off the printer and disconnect cables and
power cord.
power cord.
2
Remove the screws that secure the controller board
and slide the controller board out of the printer.
Place it on a stable horizontal surface.
and slide the controller board out of the printer.
Place it on a stable horizontal surface.