Xerox Phaser 1235 产品宣传页
74
Phaser 1235 Network Color Printers
Maintaining the Printer
Adjusting Color Density and Balance
Over the life of the printer, colors may change. For example, reds may begin to take on a
purple cast, or blues may take on a green cast. This happens during the normal use of a
color printer and can be easily remedied by using the color adjustment procedure
described in this section.
purple cast, or blues may take on a green cast. This happens during the normal use of a
color printer and can be easily remedied by using the color adjustment procedure
described in this section.
Note
This procedure, which should be done monthly, will help correct any color
shifts.
shifts.
This front panel procedure involves printing a test page and adjusting the densities and
colors based on the appearance of the test page. You may need to repeat this procedure
and test your adjustments until you achieve the desired results.
colors based on the appearance of the test page. You may need to repeat this procedure
and test your adjustments until you achieve the desired results.
Note
At any time, you can reset the printer to the factory defaults by selecting Color
Defaults from the Color Adjust Menu.
Note
Refer to the section Using the Front Panel on page 39 for a functional description
of the front panel.
Printing a Test Page
1
Press Menu Up
†
or Menu Down until you see:
2
Press Item Up or Item Down.
You will see:
You will see:
The printer prints the Color Balance test print.
†
Note that the buttons have graphics and numbers only (no written labels) on the 220 V models
of the printer. Please see
on page 39 for button numbers and graphics.
Menus
Color Adjust
Color Adjust
Processing