Xerox Phaser 1235 产品宣传页
76
Phaser 1235 Network Color Printers
Maintaining the Printer
Making Adjustments
Use the following procedures to make adjustments to the color density and balance:
Black Density Adjustment
1
Press Item Up
†
or Item Down until you see:
2
Press Value Up or Value Down until you see:
Values are
-3K, -2K, -1K, 0, +1K, +2K, +3K
.
3
Press Enter. The Color Adjust Page prints and the front panel displays:
4
Repeat Steps 2 and 3 above until you are satisfied with the results.
To exit this menu, scroll to Exit with the Item button and select YES with the Value button.
To exit this menu, scroll to Exit with the Item button and select YES with the Value button.
Color Density Adjustment
1
Press Item Up
†
or Item Down until you see:
2
Press Value Up or Value Down until you see:
Values are
-3CMY, -2CMY, -1CMY, 0, +1CMY, +2CMY, +3CMY
.
3
Press Enter. The Color Adjust Page prints and the front panel displays:
4
Repeat Steps 2 and 3 above until you are satisfied with the results.
5
To exit this menu, scroll to Exit with the Item button and select YES with the Value button.
†
Note that the buttons have graphics and numbers only (no written labels) on the 220 V models
of the printer. Please see
on page 39 for button numbers and graphics.
Color Adjust Menu
Black Density
Black Density
Black Density =
New Value
New Value
Color Adjust Menu
Black Density
Black Density
Color Adjust Menu
Color Density
Color Density
Color Density =
New Value
New Value
Color Adjust Menu
Color Density
Color Density