Xerox Phaser 1235 产品宣传页
82
Phaser 1235 Network Color Printers
Troubleshooting
Front Panel Messages
Your printer displays messages on the front panel when operator intervention is required.
The two-line display of the front panel provides information about the condition of the
printer and the suggested or required course of action.
The two-line display of the front panel provides information about the condition of the
printer and the suggested or required course of action.
There are two types of messages that require action:
■
Fault messages appear when the printer stops due to a malfunction, such as a paper
jam. Action must be taken to resolve the fault.
jam. Action must be taken to resolve the fault.
■
Attention messages do not stop the printer, but warn of action that should be taken to
avert a shutdown.
avert a shutdown.
The table below lists fault and attention messages in alphabetical order, along with an
explanation and corrective action.
explanation and corrective action.
Front Panel Messages
Message
Type
Explanation/Corrective Action
Check Tray
[Check Tray 1]
[Check Tray 2]
[Check Tray 3]
[Check Tray 2]
[Check Tray 3]
No Tray Present
Fault
The indicated tray is not installed. Make sure
the tray is fully inserted.
Controller Fan Error U8
Power Off/On
Power Off/On
Fault
An error has been detected with the
controller cavity cooling fan. Turn off the
printer, wait 15 seconds, then turn on the
printer. If the problem persists, check the
support links at
www.xerox.com/officeprinting/1235support.
Disk Read [Write] Error
Press Enter To Clear
Press Enter To Clear
Attention
There was a hard disk read error that
prevented the data from being read. Press the
Enter button to clear the message. Turn off
the printer, wait 15 seconds, then turn on the
printer. If the problem persists, check the
support links at
www.xerox.com/officeprinting/1235support.