Xerox Phaser 850 安装指南

 

Cleaning for multipicks: separator pad 

 

If the printer picks multiple sheets of paper from the upper tray, clean the separator pad.  

 

Remove the upper media tray from the printer.

 

Using an alcohol-soaked cloth, gently wipe the separator pad. 

 

Inspect the separator pad for damage to the metal edge; it should be free of dents and lie flat 
against the rubber surface.  If any damage is seen, the separator pad should be replaced.

 

Replace the upper media tray in the printer.

 

Cleaning for lower tray jams: paper-feed rollers 

 

If the printer feeds paper incorrectly or feeds more than one sheet at a time from the High-Capacity 
Paper Tray Assembly, and the rollers are visibly dirty, perform the following cleaning procedures.  

 

Remove the paper tray from the High-Capacity Paper Tray Assembly.  If your printer has two 
assemblies, remove the tray from each one.  The two paper-feed rollers for each assembly are 
visible when each tray is removed.

 

Using an alcohol-soaked cloth, 

 

Rotate the roller several times to 

ensure proper cleaning.   

 

Replace the paper tray in the High-Capacity Paper Tray Assembly.

9103-63

9103-22