Xerox Phaser 850 产品宣传页
Advanced Features and Troubleshooting Manual
49
Troubleshooting Phaser 850 Printers
Printing problems
The printer times out when connected to a parallel port
■
Windows users: To change the timeout for transmission retry, refer to the Microsoft
Online Help for instructions.
Online Help for instructions.
Part of the image is missing or image is clipped
■
For more details on page sizes, print areas, and margins, refer to User Guide.
To maximize the image area, you may have to adjust the margins in your application
software.
To maximize the image area, you may have to adjust the margins in your application
software.
■
In your application, check the setting for Image Size.
■
Make sure you have selected the correct paper size in the printer driver.
■
Make sure you have selected Page Setup after changing printers.
You have problems printing from a specific application
■
Get information and tips on printing from specific applications (such as QuarkXPress
and PageMaker) from the Tektronix Color Printer web site.
and PageMaker) from the Tektronix Color Printer web site.
Fonts print incorrectly in Windows
■
If you have downloaded fonts to your printer, or stored additional fonts on the
internal hard drive, you may need to reinstall the fonts.
internal hard drive, you may need to reinstall the fonts.
■
If you are using PostScript fonts, make sure ATM (Adobe Type Manager) is installed
and configured properly. ATM software is shipped with your printer.
and configured properly. ATM software is shipped with your printer.
Text prints in Courier font
■
The font you have specified is not available. The printer has 136 resident fonts.
Other fonts must be set up from the printer driver to print with each job.
Other fonts must be set up from the printer driver to print with each job.