Xerox Phaser 850 用户指南
102
Phaser 850 Color Printer
Advanced Printing Features for Phaser 850 Printers
Automatic tray switching
When your printer has a High-Capacity Paper Tray Assembly, you can easily run large jobs
without having to replace paper often. The printer automatically takes paper from the
next tray when the first tray runs out.
without having to replace paper often. The printer automatically takes paper from the
next tray when the first tray runs out.
1.
For automatic tray switching to work properly, load the same type and size paper in
all of the printer’s paper trays.
all of the printer’s paper trays.
2.
Install a tray in each of the printer’s tray slots.
3.
In the printer driver, select Paper as the source.
Front Panel Intensity
You can adjust the intensity of the front panel’s back lighting.
1.
In the printer’s front panel, scroll to Menu; press Select.
2.
Scroll to Printer Configuration; press Select.
3.
Scroll to Default Printer Settings; press Select.
4.
Scroll to Set Front Panel Intensity; press Select.
5.
To change the front panel back light intensity (0 is no back light, 10 is the brightest
back light), press the up or down arrows.
back light), press the up or down arrows.
6.
To activate your selection, press Select.
7.
To return to the Ready to Print message, scroll to Exit; press Select.
Intelligent Ready mode
Intelligent Ready mode is an automated system that monitors the printer’s usage and
warms up the printer when you are most likely to need it. You can set Intelligent Ready
mode with PhaserLink or the printer’s front panel. The front panel only allows you to turn
Intelligent Ready mode On or Off; use PhaserLink to make other settings.
warms up the printer when you are most likely to need it. You can set Intelligent Ready
mode with PhaserLink or the printer’s front panel. The front panel only allows you to turn
Intelligent Ready mode On or Off; use PhaserLink to make other settings.
1.
In the printer’s front panel, scroll to Menu; press Select.
2.
Scroll to Printer Configuration; press Select.
3.
Scroll to Default Printer Settings; press Select.
4.
Scroll to Advanced Printer Settings; press Select.
5.
Scroll to Intelligent Ready.
6.
Press Select to turn this option On or Off.
7.
To return to the Ready to Print message, scroll to Exit; press Select.
Note
You can also turn on the Intelligent Ready mode and set your own printer
warm-up times through PhaserLink Printer Management software. For details on
PhaserLink Printer Management software, refer to the PhaserShare Networking
Manual on the printer’s CD-ROM or Tektronix web site.
warm-up times through PhaserLink Printer Management software. For details on
PhaserLink Printer Management software, refer to the PhaserShare Networking
Manual on the printer’s CD-ROM or Tektronix web site.