Xerox Phaser 850 用户指南

Printing a color sampler chart from the Phaser 850 
printer’s front panel

Use the same color correction and print quality mode to print the chart and to 
print from your application.  Any other color correction or print quality mode 
selections in the driver will cause colors to print differently than expected.

From the printer’s front panel, use the up and down arrows to scroll to Menu; 
press Select.

Scroll to Printer Configuration; press Select.

Scroll to Default Printer Settings; press Select.

Scroll to TekColor Correction; press Select.  

Scroll to the color correction you want; press Select.  A checkmark appears next to 
your selection.

Scroll to Previous Menu; press Select.

Scroll to Print Quality Mode; press Select.

Scroll to the print quality mode you want; press Select.  A checkmark appears next to 
your selection.

To return to the Ready to Print message, scroll to Exit; press Select.

From the printer’s front panel, scroll to Printer Demo and press Select.

Scroll to the desired color sampler, then press Select.  The color sampler prints.  

To return to the Ready to Print message, scroll to Exit; press Select.

Printing the desired colors from an application

Using the color sampler chart that you printed earlier, select the desired colors.

From your application, apply the desired colors in your document by entering the 
specific CMYK or RGB values as indicated on the sampler chart.

Print your document; select the same color correction and print quality mode that you 
used to print the color sampler chart.