Xerox Phaser 850 用户指南
46
Phaser 850 Color Printer
Emptying the waste tray
When the front panel displays Empty Waste Tray, follow this
procedure.
procedure.
See page 9 for supplies ordering information.
Caution
The printer’s interior may be hot. Do not reach into the
printer while the maintenance drawer is removed.
printer while the maintenance drawer is removed.
1.
Open the front cover.
2.
Grasp the maintenance drawer, labeled as A, and pull it out of the
printer.
printer.
Note
The maintenance drawer may be locked while the ink
cools after the front panel troubleshooting routine,
Eliminate Light Stripes. Make sure all covers are
closed. Wait 15 minutes before trying to remove the
maintenance drawer. The maintenance drawer may
also be locked during the warm up cycle whenever the
printer is turned on.
cools after the front panel troubleshooting routine,
Eliminate Light Stripes. Make sure all covers are
closed. Wait 15 minutes before trying to remove the
maintenance drawer. The maintenance drawer may
also be locked during the warm up cycle whenever the
printer is turned on.
Waste Tray