Xerox Phaser 3010 用户指南

Troubleshooting

Phaser 3010/3040 Printer

User Guide

General Troubleshooting

This section includes:

Printer Does Not Turn On ................................................................................................................................................. 36

The Printer Does Not Print ............................................................................................................................................... 36

Printer Resets or Turns Off Frequently ........................................................................................................................ 37

Printer is Making Unusual Noises .................................................................................................................................. 37

This section contains procedures to help you locate and resolve problems. Resolve some problems by

simply restarting the printer.

Printer Does Not Turn On

Probable Causes

Solutions

The power switch is not turned on.

Turn on the switch.

The power cord is not correctly plugged into
the outlet.

Turn off the printer power switch, and plug the power cord securely
into the outlet.

Something is wrong with the outlet connected
to the printer.

Plug another electrical appliance into the outlet and see if it
operates properly.

Try a different outlet.

The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.

Use a power source with the specifications listed in the

Electrical

Specifications

CAUTION:

Plug the three-wire cord with grounding prong directly into a grounded AC outlet.

The Printer Does Not Print

Probable Causes

Solutions

The printer is in Energy Saver mode.

Push the control panel button.

PrintingScout displays an error message.

Follow the instructions in the PrintingScout message to correct the
problem. If the error persists, contact your Xerox representative.