Xerox Phaser 300X 安装指南

When you download a color correction utility file to the printer, Switches 8 
and 9 on the printer’s rear panel must both be in the up position for the color 
correction option to take effect.  For example, before you download the 
Simulate Display (DISPLAY.PS) file to the printer, make sure Switches 8 and 9 
are both up.  Both switches must remain in the up position for the 
downloaded color correction to be available.  If either switch’s position is 
changed, the default color correction changes, although the default is 
restored when you put both switches back in the up position again.  Refer to 
the topic “Selecting color corrections with a printer switch” on page 10 for 
more information.

■

A utility file color correction is used when you select the 
Use Printer Setting

 option in the Tektronix driver. 

■

A utility file color correction is overridden by all driver color 
correction options, except Use Printer Setting.  

■

A utility file color correction is overridden if either switch is 
changed to another position.  For example, Switch 8 up and 
Switch 9 down enables the Vivid Color color correction.  Refer to 
“Selecting color corrections with a printer switch” on page 10 for 
more information.

■

A utility file color correction remains in effect between print jobs 
and between printer power cycles.  

■

To change any utility file color correction, download another 
utility file to the printer.