Xerox Phaser 300X 安装指南
7
Using Color
7-8
Phaser 300X Color Printer
Printing the CMYK, RGB, and HSB color charts
Macintosh users
Note
If you are using QuickDraw GX, you can print the color charts
from the Tektronix Phaser 300X GX printer driver; see page 2-22
for instructions.
from the Tektronix Phaser 300X GX printer driver; see page 2-22
for instructions.
1.
Install the printer’s software as described on page 2-2. Select Easy
Install
Install
to automatically install the software, or select a printer
driver, such as the Adobe PSPrinter driver, and the Samplers item in
the Custom Install window.
the Custom Install window.
If you need to select color corrections with downloadable utility
files, also install the Printer Utilities item in the Custom Install
window.
files, also install the Printer Utilities item in the Custom Install
window.
2.
Select the appropriate printer in the Chooser.
3.
Decide which color correction you need to use; see the table on
page 7-7 for details.
page 7-7 for details.
If you are selecting a color correction with the printer’s switches,
refer to page 6-10 for instructions.
If you need to download a color correction utility file:
a.
Locate the LaserWriter Utility in the PhaserTools folder on your
hard disk, and double–click its icon to start the application.
hard disk, and double–click its icon to start the application.
b.
Choose Download PostScript File from the Utilities menu.
c.
Select a color correction file from the list, then click Open.
(These files were installed in the Printer Utilities folder inside
the PhaserTools folder.)
(These files were installed in the Printer Utilities folder inside
the PhaserTools folder.)
d.
At the prompt
Save PostScript output as:
you are
asked for a file name for saving printer output. Use either the
default name given in the edit box or type a new name.
Click Save to send the file to the printer.
default name given in the edit box or type a new name.
Click Save to send the file to the printer.