Xerox DocuColor 12 Printer with Fiery EX12 产品宣传页
USAGE GUIDELINES FOR XEROX COLOUR COPIERS AND PRINTERS
COLOUR MATERIALS USAGE GUIDE
Visit our website at www.xerox.com
41
Pressure-Sensitive Labels
Contact your Xerox representative or visit the Xerox website for the
current list of recommended materials for your copier/printer.
current list of recommended materials for your copier/printer.
Description and expectations
Pressure-sensitive label stock consists of three layers: the face
sheet, the pressure sensitive adhesive, and the backing or release
sheet. There are many types of face sheets and label weights
available. To avoid feeding and image quality problems, it is very
important to run labels with the correct balance of properties. The
recommended Xerox copier/printer labels have been specifically
designed to give optimum performance. They have low weight/low
stiffness for improved feeding.
sheet, the pressure sensitive adhesive, and the backing or release
sheet. There are many types of face sheets and label weights
available. To avoid feeding and image quality problems, it is very
important to run labels with the correct balance of properties. The
recommended Xerox copier/printer labels have been specifically
designed to give optimum performance. They have low weight/low
stiffness for improved feeding.
Refer to the
Recommended Materials list for your copier/printer to
determine if you can run labels on your machine, and if so, which
labels are recommended.
labels are recommended.
Hints, tips and testing results
Xerox testing has shown the following:
•
When the recommended materials are run, with the correct
tray, mode and orientation, feeding performance and image
quality is good but will not equal the performance Colotech +
tray, mode and orientation, feeding performance and image
quality is good but will not equal the performance Colotech +
90 g/m
2
paper.
•
Do not use the Normal paper mode when running labels. Use
the Heavy Weight or Thick paper mode. See your
Recommended Materials list for more specific information.
the Heavy Weight or Thick paper mode. See your
Recommended Materials list for more specific information.
•
In general, labels with a low weight face, backing sheet, and a
pattern-printed adhesive will run successfully. Overall weight
pattern-printed adhesive will run successfully. Overall weight
should be less than 203 g/m
2
. Run labels with the grain
parallel to the leading edge.
If attempting to use labels that have not been recommended,
first try a small quantity to test the performance, then consult
your local Xerox representative for agreement on its use.
first try a small quantity to test the performance, then consult
your local Xerox representative for agreement on its use.
CAUTION: Do not use dry gum labels (those that require moistening
before being applied) as they can cause severe machine
contamination problems.
before being applied) as they can cause severe machine
contamination problems.