Xerox DocuColor 12 Printer with Fiery EX12 安装指南

After you perform initial Setup (Server, Network, and Printer Setup) from the Control 
Panel, you can change most Setup options from a Windows computer. 

In addition to using the Control Panel, you can set up the Fiery two ways: locally 
and remotely. Local Setup is for systems with the Fiery Advanced Controller 
Interface. Local Setup uses a Windows NT application, Fiery Server Setup. 
Remote Setup is performed from a Windows computer using Fiery WebSetup 
or Command WorkStation. 

In this chapter, illustrations for both Setup interfaces, where applicable, appear 

side by side: local Setup on the left, remote Setup on the right. Descriptions for the 
Setup options are listed in the order in which they appear on the local Setup window. 
Some Setup options cannot be accessed from remote Setup; use local Setup or the Fiery 
Control Panel instead.

Regardless of how you access Setup, you must log in as Administrator, both at the Fiery 
and within the Setup application you use. After the Fiery is rebooted, log in at the 
Windows NT Logon window with Administrator as the login name and the password, 
if required. This login and password are the Windows NT login and password.

To use the Setup applications (Fiery WebSetup or Command WorkStation), you must 
enter the Fiery Administrator password. This is set either from the Control Panel, 
Fiery WebSetup, or Command WorkStation.

Fiery WebSetup is supported for Windows computers only.