Xerox DocuColor 12 Printer with Fiery EX12 安装指南
5
5-7
Network Setup
Network Setup
Network Setup configures the Fiery to receive print jobs over the networks that are
used at your site. If the Fiery is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When two
network ports are enabled, print jobs can be received over all ports at the same time.
used at your site. If the Fiery is configured to enable more than one protocol, it
automatically switches to the correct protocol when it receives a print job. When two
network ports are enabled, print jobs can be received over all ports at the same time.
You can view and specify the following network settings in Network Setup:
• Adapters and ports—view currently configured network adapters and port settings
• Protocols—including AppleTalk, IPX/SPX, and TCP/IP
• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer),
Windows print sharing (SMB), HTTP support (WWW), IPP printing, and
Port 9100 printing
Port 9100 printing
Adapters/Ports
In local Setup only, the installed network boards are displayed. You cannot change this
information. From remote Setup, you can enable Ethernet or Token Ring. These
options are described in the next section.
information. From remote Setup, you can enable Ethernet or Token Ring. These
options are described in the next section.