Xerox DocuColor 12 Printer with Fiery EX12 安装指南
3
3-8
Preparing for Fiery Setup
Resident on the Windows NT Workstation is the following software unique to
the Fiery:
the Fiery:
• Server—The Server is an independent software process started automatically
whenever Windows NT is booted. As the central element of Fiery system software,
the Server process controls the spooling, rasterizing, and printing of jobs, as well as
job accounting (the Job Log), storage, and retrieval.
the Server process controls the spooling, rasterizing, and printing of jobs, as well as
job accounting (the Job Log), storage, and retrieval.
When the Server is not running, jobs cannot be received by the Fiery, job processing
cannot occur, job data cannot be transferred to the copier/printer for printing, and
Command WorkStation cannot connect to the Fiery. In the event that you need to
restart the Server process, right-click the FieryBar
cannot occur, job data cannot be transferred to the copier/printer for printing, and
Command WorkStation cannot connect to the Fiery. In the event that you need to
restart the Server process, right-click the FieryBar
™
and choose Restart Fiery.
• Command WorkStation—Command WorkStation is the interface tool for the
Server. It provides a graphical means of viewing and controlling Server functions.
About Setup
Setup configures the Fiery to communicate with other devices and manage print jobs.
You must perform Setup the first time you turn on the Fiery after new system software
is loaded, or any time Server software is reinstalled. An initial Setup using default
settings is adequate for allowing users to print to the Fiery and to use the Fiery
WebTools. When your network or user printing environment changes, you can change
Setup options accordingly.
You must perform Setup the first time you turn on the Fiery after new system software
is loaded, or any time Server software is reinstalled. An initial Setup using default
settings is adequate for allowing users to print to the Fiery and to use the Fiery
WebTools. When your network or user printing environment changes, you can change
Setup options accordingly.
The first time you perform Setup, you must use the Fiery Control Panel. Configure, at
a minimum, Server Setup, Network Setup, and Printer Setup, in that sequence. After
the initial Setup, you can change Setup options from the Control Panel (
a minimum, Server Setup, Network Setup, and Printer Setup, in that sequence. After
the initial Setup, you can change Setup options from the Control Panel (
) or
Command WorkStation. Most Setup options can be set using any of these methods.
N
OTE
:
Configuring and monitoring the Windows NT functions on the Fiery require
the Fiery Advanced Controller Interface option. For more information, contact your
authorized service/support technician.
authorized service/support technician.
If you do not configure the remaining Setups, the Fiery uses default settings. You need
to make settings appropriate for the printing environment at your site.
to make settings appropriate for the printing environment at your site.