Xerox DocuColor 12 Printer with Fiery EX12 文件

 

Part Number: 45027236

Generating excessive e-mail traffic can reduce the performance of the Fiery. If you have 
questions about your e-mail server, contact the administrator of your e-mail system. 
For optimal performance of the Fiery, follow these suggestions for E-mail Services:

• The recommended maximum e-mail attachment size is 15MB.

• Do not send file attachments larger than the maximum e-mail attachment size set by the 

administrator. For information about how to set this limit, see the Configuration Guide.

• The maximum attachment size that the administrator specifies should be the same as the 

maximum size specified on the e-mail server. If the maximum size specified at the e-mail 
server is lower, the lower size applies.

• When users use the Fiery port monitor as their e-mail port, the maximum attachment 

size for the port monitor should be the same as that for the e-mail server.

• When users use Scan to E-mail, an e-mail that exceeds the limit of the e-mail server is 

not sent.

After you have completed printer driver installation, you need to configure the Fiery for the 
options installed on the copier. You can configure the options manually; or for TCP/IP 
network connections, you can use the Two-Way Communication feature to configure the 
options automatically.

The following procedure describes configuring installable options manually on the 
Fiery EX2000d. To manually configure installable options on the Fiery EX12, see the 
procedure for Windows NT 4.0 in the User Software Installation Guide.