Xerox DocuColor 12 Printer with Fiery EX12 文件
8
Addendum
Part Number: 45027236
The following print options are modified:
• Page Order—default is Printer’s default and not Reverse.
• Notes, Group Name, and Group Password—each has a 31-character limit. The Group
Password is case-sensitive.
• Instructions—255-character limit.
• Combine Separations—settings are Printer’s default, On, Off, 1-PgAutomatic.
Fiery EX2000d printer options
The following print options are modified:
• Black Overprint Style—Printer’s default is no longer an available setting.
• Media Type—Add Uncoated 64-80gsm paper to the list of media types.
• Paper/Page Sizes—Default setting is Letter and not 8.5
x
11 Letter LEF.
Add A4, A3, and Legal to the list of page sizes.
Bleeds
This section replaces the corresponding section in Chapter 6 of the Job Management Guide.
The Bleeds option moves the trim marks into the image by the amount you specify to
ensure that the printed area extends beyond the edge of the trimmed sheet.
ensure that the printed area extends beyond the edge of the trimmed sheet.
To specify horizontal and vertical bleed amounts for a job, click Define in the Layout panel
and enter values (from 0 to 72 points, 0 to 1 inch, or 0 to 25.4 mm) in the Define Bleeds
dialog box.
and enter values (from 0 to 72 points, 0 to 1 inch, or 0 to 25.4 mm) in the Define Bleeds
dialog box.
You can adjust the horizontal bleed distance independently from the vertical distance.
This allows you to compensate for the tolerance of the cutter. You can place trim marks
outside the bleed area or allow the trim marks to overlap the bleed area.
This allows you to compensate for the tolerance of the cutter. You can place trim marks
outside the bleed area or allow the trim marks to overlap the bleed area.
The Bleeds option is not available in Mixed Page mode.
EX2000d
Job Management
Guide
Guide
Non-imageable area
Trim marks
Image