Xerox DocuColor 12 Printer with Fiery EX12 产品宣传页

 of the procedure 

For this new simulation to be automatically applied to a print job, the CMYK 
Simulation, Simulation Method, and Output Profile settings must be the same as those 
used when you edited the profile. If the Simulation Method is different or a different 
output profile is selected, the Master simulation is applied.

A Simulation Profile can have a custom Master and one or more custom links—

up to three links (Quick mode and the two Full modes) for each output profile on the 
system. (For the CMYK Simulation Profile option in the printer driver, note that if 
you select a custom profile for which the output ink percentage is greater than 0 and 
the input ink percentage is 0, the Use Master print option will have no effect.)

You can undo the changes you made to simulations (master and linked) in the 
following ways:

• If you have not yet saved your edits, click Done on the Color Editor menu bar, and 

do not save the changes.

• If you saved your edits under a new simulation name and want to delete all edits (in 

Master, Quick, and Full modes) to the simulation, see 

The AutoGray feature lets you use the copier’s built-in scanner as a measurement 
device for correcting the gray balance of output profiles. Gray balance refers to the 
quality of neutral gray tones in a profile. In many cases, gray tones may contain a 
bluish or reddish color cast. AutoGray helps shift these tones back toward 
neutral grays.