Xerox DocuColor 12 Printer with Fiery EX12 产品宣传页
2
2-25
Preparing to work with Command WorkStation
5.
In the Print Alignment Page section, select the Print Duplex option to print a duplex
page, or clear the option to print a simplex page.
page, or clear the option to print a simplex page.
6.
Click Print to print the alignment page.
7.
Once the page has printed, follow the directions on the alignment page.
Fold the page exactly in half horizontally, unfold it, and then fold it in half vertically.
When you unfold the sheet again, you will see that the fold lines cross three scales on
three sides of the page. Determine which number on the scale each fold line crosses.
When you unfold the sheet again, you will see that the fold lines cross three scales on
three sides of the page. Determine which number on the scale each fold line crosses.
8.
In the Enter alignment values section, enter the value where the fold crosses each of
the three scales, marked A, B, and C, for Side 1. If you choose to align for duplex
printing, enter the values for the three scales on Side 2 of the page as well.
the three scales, marked A, B, and C, for Side 1. If you choose to align for duplex
printing, enter the values for the three scales on Side 2 of the page as well.
N
OTE
:
If you enter different values in A and C, the image will rotate, leading to uneven
areas on printed output. If this occurs, enter the same value in A and C.
The following combinations of print options will create a margin of 8.5 mm on the
trailing edge, if Imageable Area is set to Full:
trailing edge, if Imageable Area is set to Full:
• Portrait with Top-Bottom (long edge feed)
• Portrait with Top-Top (short edge feed)
• Landscape with Top-Top (long edge feed)
• Landscape with Top-Bottom (short edge feed)
9.
When you have entered all of the alignment values, click Apply. Click Check Alignment
to print the new alignment page.
to print the new alignment page.
10.
If you want to remove the alignments, select a tray and click Defaults in the Enter
alignment values section.
alignment values section.
11.
Click Done when you are finished.
Managing server fonts
The Fiery includes a number of built-in printer fonts. You can download additional
fonts to the Fiery using the Manage Font command. Users on the network can also
download fonts to the server using Fiery Downloader (see the
fonts to the Fiery using the Manage Font command. Users on the network can also
download fonts to the server using Fiery Downloader (see the
Printing Guide
).
N
OTE
:
To use the Manage Font command, you must be logged in to the Fiery with
Administrator privileges.