Xerox DocuColor 12 Printer with Fiery EX12 产品宣传页
C
C-4
Troubleshooting
Problems with print quality
For information about printing with specific applications and optimizing color output,
see the
see the
Color Guide
.
If this happens
Try this
Print settings for your job
output do not match the
settings you gave.
output do not match the
settings you gave.
•
Make sure you did not override the settings for the job in another place.
For information about options and overrides, see
You get poor printing results.
•
Does your application require one of Fiery’s printer description files?
Your application may require one of the Fiery’s PPDs. If you print from Adobe
PageMaker, make sure the Fiery PPD is installed correctly. For information about
installing this file, see the
PageMaker, make sure the Fiery PPD is installed correctly. For information about
installing this file, see the
User Software Installation Guide
.
•
Make sure the system has been calibrated.
For instructions, see the
Color Guide
.
The registration or colors of
an image are not what you
expected.
an image are not what you
expected.
•
Ask the operator to print a test page with the copier/printer.
The problem may be with the copier/printer. If your test page shows that the
copier/printer is working properly, correct the problem within your application. If the
test page is wrong, your copier/printer may need to be adjusted.
copier/printer is working properly, correct the problem within your application. If the
test page is wrong, your copier/printer may need to be adjusted.
Your printed file appears too
dark.
dark.
•
Adjust the Brightness option.
You can use the Brightness option when printing from an application or from Fiery
Downloader to lighten your image whenever you print a PostScript or Encapsulated
PostScript (EPS) file.
Downloader to lighten your image whenever you print a PostScript or Encapsulated
PostScript (EPS) file.
Color file prints in black and
white.
white.
•
In the Color Matching dialog box, make sure that Color/Grayscale, or ColorSync Color
Matching or PostScript Color Matching is selected (not Black and White).
Matching or PostScript Color Matching is selected (not Black and White).
•
Make sure the Color Mode print option is set to an option other than Grayscale.
Desktop Color Separations
(DCS) format images print
incorrectly.
(DCS) format images print
incorrectly.
•
Make sure you selected the correct options to send separations in the application’s Print
dialog box.
dialog box.
•
Make sure you have the file for every layer of separation that you are printing.
•
Set the Combine Separations option to On.
This combines the high-resolution files for an image and prints them. With Combine
Separations Off, the low-resolution master file will print.
Separations Off, the low-resolution master file will print.
QuickDraw fill patterns print
as solids.
as solids.
•
Use the Adobe PostScript Printer driver (or the Apple LaserWriter 8.3 or later printer
driver).
driver).