Xerox DocuColor 12 Printer with Fiery EX12 安装指南
1
1-9
Completing the Windows 9x/Me printer connection
Completing the Windows 9x/Me printer connection
To print from Windows 9x/Me, you should already have set up network servers, if any,
and set up the Fiery to accept print jobs from your computer.
and set up the Fiery to accept print jobs from your computer.
To complete the Windows 9x/Me connection, you must configure a connection on
each Windows computer for the network.
each Windows computer for the network.
Completing the Windows 9x/Me IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print connection for the Fiery. For details, see your NetWare documentation and the
be set up before you begin. The file server should be configured with a print server and
print connection for the Fiery. For details, see your NetWare documentation and the
Configuration Guide
.
To print from Windows 9x/Me computers over IPX (Novell), you must first set up
IPX/SPX protocols, and then configure the Fiery by choosing the IPX frame type and
entering the settings for the port you use.
IPX/SPX protocols, and then configure the Fiery by choosing the IPX frame type and
entering the settings for the port you use.
T
O
SELECT
A
FRAME
TYPE
FOR
IPX/SPX
PRINTING
FOR
W
INDOWS
9
X
/M
E
1.
Click Start, choose Settings, and then choose Control Panel.
2.
Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol is listed in the Installed Network
Components section.
Components section.
For instructions, see your Windows 9x/Me documentation or contact Microsoft
Technical Support.
Technical Support.