Xerox DocuColor 12 Printer with Fiery EX12 安装指南

The path for the printer is the IP address or the DNS name, followed by 

ipp

, and then 

by the Fiery connection you want to print to (

print

, 

hold

, or 

direct

). Insert slashes 

between the elements, for example, 

http://10.10.10.150/ipp/print

.

To set up the Fiery as a PostScript printer, you must install the PostScript printer driver 
for Windows NT 4.0 or Windows 2000/XP and the corresponding printer description 
files. You must also configure the print connection between the computer and the 
Fiery. If you are printing over a network, you must configure a network connection.

The following procedures describe the installation of a local printer. Adding a printer 
to a local system requires that you log in to your local Windows NT 4.0 computer 
(not the network server domain) and that you are a member of the Administrators 
group. The procedure for adding a network printer is similar to adding a port. See 

If you are printing using SMB on Windows NT 4.0, you can connect to the Fiery and 
install the printer drivers in a single procedure; see 

.