Xerox DocuColor 12 Printer with Fiery EX12 用户指南
ADDED FEATURES
5–6
DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7
5
Manual 2 Sided copying
KEY POINT: The 2 Sided Copying feature is
available for output of 16 lb. through 28 lb. (64
through 105 gsm) paper for standard sizes smaller
than 12 x 18 inches (A3).
available for output of 16 lb. through 28 lb. (64
through 105 gsm) paper for standard sizes smaller
than 12 x 18 inches (A3).
To create 2-sided copy for output stock that varies
from the requirements for the automatic 2 Sided
Copying feature, you must perform a manual feed
from Paper Tray 5.
from the requirements for the automatic 2 Sided
Copying feature, you must perform a manual feed
from Paper Tray 5.
KEY POINT: In the following procedure, you may
want to make one extra copy in step 1 to use as a
sample for checking image orientation. Change
quantity to 1 before performing step 4. Once you
are satisfied with the orientation, change the
quantity again to complete the job.
want to make one extra copy in step 1 to use as a
sample for checking image orientation. Change
quantity to 1 before performing step 4. Once you
are satisfied with the orientation, change the
quantity again to complete the job.
1
Copy the first side using the 1 Sided option.
2
Select Tray 5 as the Paper Supply option on the
Basic Copying tab.
Basic Copying tab.
KEY POINT: Be sure to remove extra paper from
Tray 5 before loading copies or side 2 copying.
Tray 5 before loading copies or side 2 copying.
3
Position your copies in Paper Tray 5 with the
image side down.
image side down.
Ensure the top of the image is oriented in the
same direction as the top of the original
document.
same direction as the top of the original
document.
4
Copy as a 1 Sided Copy.