Xerox DocuColor 12 Printer with Fiery EX12 管理员指南
DOCUCOLOR 12 PRINTER SYSTEM ADMINISTRATION GUIDE
3–7
TOOLS MODE
1
2
3
4
5
6
7
Audio Tones
You can change the Audio Tones settings for the
following options:
following options:
•
Selection Tone
•
Conflict Tone
•
Control Panel Input Tone
•
Fault Tone
You can select the Control Panel Input Tone to
either the on or off position. For all other options,
you can select the tone to off or set its volume to
soft, normal or loud.
either the on or off position. For all other options,
you can select the tone to off or set its volume to
soft, normal or loud.
1
On the Tools screen, touch the Audio Tones
button to display the Audio Tones screen. See
Figure 11.
button to display the Audio Tones screen. See
Figure 11.
2
Review the settings for each tone. To change a
setting, use the up and down arrows to highlight
the desired tone and touch the Change Settings
button to display the detail screen.
setting, use the up and down arrows to highlight
the desired tone and touch the Change Settings
button to display the detail screen.
3
Perform one of the following:
•
For the Control Panel Input Tone, touch No
Tone or Tone. See Figure 12.
Tone or Tone. See Figure 12.
•
For the Selection, Conflict, and Fault tones,
touch No Tone, Softer, Normal, or Louder.
See Figure 13.
touch No Tone, Softer, Normal, or Louder.
See Figure 13.
4
Touch the Save button to save the settings and
return to the Audio Tones screen.
return to the Audio Tones screen.
5
If desired, repeat steps 2 through 4 for the other
tones.
tones.
6
Touch the Close button to return to the Tools
screen.
screen.
Figure 11: Audio Tones screen
Figure 12: Contol Panel Input Tone screen
Figure 13: Selection Tone screen