Xerox DocuColor 12 Printer with Fiery EX12 用户指南
DOCUCOLOR 12 PRINTER USER GUIDE
5–17
PROBLEM SOLVING
1
3
4
5
6
7
5
Resolving output quality problems
Problem
Suggested Solution
Deletions on the print edges.
Edge deletion on all sides of the print is nor-
mal, and is greatest on the lead edge of the
print.
mal, and is greatest on the lead edge of the
print.
Moisture may be present in the paper. Load
a fresh supply of paper into the trays.
a fresh supply of paper into the trays.
Some deletions may be caused by small
pieces of paper remaining in the printer com-
ponents after a paper jam has been cleared.
When clearing a paper jam, be sure to look
for and remove any paper fragments.
pieces of paper remaining in the printer com-
ponents after a paper jam has been cleared.
When clearing a paper jam, be sure to look
for and remove any paper fragments.
The image quality and the color have
degraded over a period of time.
degraded over a period of time.
The dry ink cartridge may need attention.
Contact your System Administrator for assis-
tance.
Contact your System Administrator for assis-
tance.
It is difficult to perform secondary operations
on the prints, such as writing on them or
using adhesives.
on the prints, such as writing on them or
using adhesives.
This problem is caused by the oil used in the
fusing process. The problem can be reduced
or eliminated by setting the prints aside for
one or two hours before performing a sec-
ondary operation on them. Rubbing the print
surface with a soft, clean cloth or eraser may
also help.
fusing process. The problem can be reduced
or eliminated by setting the prints aside for
one or two hours before performing a sec-
ondary operation on them. Rubbing the print
surface with a soft, clean cloth or eraser may
also help.