Xerox DocuColor 12 Printer with Splash G630 用户指南

Tray Setting Options

Splash G630 User Guide

                                                                  

•

Select Automatic to have the printer search for 

the tray that contains the paper size specified in the 
Page Settings dialog box.

•

Select Tray 1, Tray 2, Tray 3, Tray 4, or Tray 6 

to choose a specific tray; for example, to print on 
letterhead or colored paper installed in a single tray.

•

Select Tray 5 to print on the paper or 

transparency film loaded in the Bypass (manual feed) 
tray.

To print from Tray 5 from a Macintosh, select Tray 5 
under Tray Selection, then select Tray 5 option. To 
print from Tray 5 from Windows, select Tray 5 in the 
Paper tab in the Printers Properties dialog box (see 
page 39), then specify the type of paper loaded in 
Tray 5 in the Device tab.

•

Extra Heavy Weight Paper (between 163 and 
250 gsm) is the default for Tray 5.

•

Select Normal to print on recommended paper 
(16 to 24 pound).

•

Select Transparency to print on 60 to 105 gsm 
transparencies with a white leading edge. The 
only page sizes you can use with the Tray 5 
option are A4 LEF (A4L) or Letter LEF 
(LetterL), depending on the copier configuration.

•

Select Heavy Weight Paper to print on paper 
that is heavier than 24 pound (between 105 and 
163 gsm).

•

Select Transparency Interleave to print a 

transparency with a blank white piece of paper 
between transparencies.

The printer defaults to its Paper Type (Bypass) mode 
when paper or transparencies are inserted into Tray 5. 
Push the yellow Clear All button on the printer after 
inserting the paper or transparencies to return 
immediately to the print mode.

Only Face-up printing is allowed from Tray 5. Other 
user selections are ignored.

If the optional Mailbox is attached to the printer, 
select a mailbox bin to send a job to a specific bin or 
select Catch Tray to send the job to the catch tray. 
When the check box is not selected, the Splash server 
stacks all output pages, each atop the previous, in the 
bin on top of the copier.

Before changing a paper size in a paper tray, choose 
Stop Processing on the Splash server to avoid 
misprinting an active job. After inserting a different 
size cassette, choose Continue Processing to resume 
printing. Refer to the printer manual for complete 
instructions on how to change the paper size.

When paper or transparencies are inserted into the 
Bypass tray, the printer defaults to its Paper Type 
(Bypass) mode. Press the yellow Clear All button on 
the printer after inserting the paper or transparencies 
to return immediately to print mode.