Xerox DocuColor 12 Printer with Splash G630 用户指南

Splash Color Correction

Splash G630 User Guide

                                                                  

For best previews, set the Save Preview Thumbnail to 
All Pages on the Page pane of the server preferences.

If any component of the document set errors, the 
document set will not print and will instead error. To 
print the document set, correct the error shown by the 
component job and re-release the document set.

With Acquire, you can scan from the copier and save a 
TIFF file without using Photoshop. The Splash 
procedure is very similar to using Photoshop.

Select the Acquire button on the tool bar or the 

Acquire menu option on the File menu.

•

If you are using Photoshop, open the Photoshop 

application. 

Place the print to scan on the scanner in the 

upper-left corner of the glass area.

From the File menu, select Import and drag to 

choose Splash Import from the submenu. The Splash 
Acquire setup dialog box appears.

Select Color or B&W for the scan image and 

select a sharpness setting if desired.

Click Scan. After a short pause, the scanner scans 

the image. The scan is saved, then preview of the 
image appears in the Acquire window.

Acquire offers a number of options for manipulating 
the image:

•

RGB Color Correction

•

CMYK Color Correction

•

Gamma

•

Cropping Tools

•

Sizing and placement tools

•

Resolution settings

•

Interpolation

Splash Acquire without Photoshop looks and acts like 
Splash Acquire with Photoshop. For more details on 
these options in both Splash Acquire with and without 
Photoshop, see Chapter 9. 

The Spot Color Editor feature can change the output 
for existing spot colors and can add new spot colors to 
the Splash server. This tailors the spot color 

reproduction of the Splash server to better match 
particular presses.

The Spot Color Editor can also substitute patterns for 
spot colors. This enables special effects like 
producing metallic textures for selected colors.

For best results when editing or adding spot colors, 
make sure the printer is calibrated before editing 
colors.

The Spot Color Editor is launched from the Spot 
Color Editor menu on the Splash server.

To edit a spot color, select the spot color family, select 
the spot color within the family, and select edit or 
double-click the color. Spot colors can be edited three 
ways—by directly changing the L*a*b* values, by 
printing a test page, or by selecting an EPS pattern to 
use in place of the spot color.

In general, spot colors should be edited with care. No 
constraints are imposed on the changes that are made,