Xerox DocuColor 12 Printer with Splash G620 用户指南

Use the TCP/IP control panel to create an Internet address for the Splash server. Assign the Splash 
server a static Internet address so clients can reliably locate the Web Queue Manager on the network.

Before beginning, have all address information available. Obtain a static Internet address and subnet 
mask number, if needed, from your network administrator.

To configure an Internet address for the Splash Server:

At the Splash server, point to Control Panels in the Apple menu, then select TCP/IP in the 
submenu.

The TCP/IP control panel appears.

Choose the network connection type for the Splash server’s TCP/IP network in the Connect via 
menu.

Select Manually in the Configure menu.

Enter the IP Address for the Splash server.

Enter a Subnet mask number if needed. A subnet mask provides additional address information 
for some networks.

Enter the Router address if needed. A network router maintains a list of IP addresses for two or 
more groups of network devices. The router then uses the list of addresses to direct network data 
to the appropriate location on the network. To enter two or more router addresses, press the 
Return key after you enter each address.

Enter a Name server address for the DNS server on your network (for example, 
design.corp.com).

Close the TCP/IP control panel. A dialog box prompts to confirm the new setup.

Click OK. 

Configuration is complete. You are ready to enable web access at the Splash Server.

Start the Splash server application, then choose Preferences from the Server menu. The Splash 
Server Preferences dialog box appears.

Click Network at the top of the Preferences dialog box.

Under Services, select the Enable Web Access check box.

Click OK.