Xerox DocuColor 12 Printer with Splash G620 用户指南
Splash G620 User Manual v2.0
116
Editing Percentages and Densities
PN: 0016964-0101
6.
Select OK. ColorCal prompts to save changes or cancel if OK is selected before saving a profile.
Note that the new profile is automatically calibrated to the last time calibration was run as it is
created.
Note that the new profile is automatically calibrated to the last time calibration was run as it is
created.
Editing Percentages and Densities
ColorCal creates custom color profiles by editing curve definition percentages and densities. This
feature allows easy and accurate curve definition using information derived from other sources, such
as a densitometer. ColorCal is able to match only the shape of the curve on output, not the exact
numbers entered.
feature allows easy and accurate curve definition using information derived from other sources, such
as a densitometer. ColorCal is able to match only the shape of the curve on output, not the exact
numbers entered.
1.
Select a color profile to edit from the popup menu.
2.
Select a color curve to edit from the floating color curve palette. The Edit Table button is
disabled when the Master curve is selected.
disabled when the Master curve is selected.
3.
Select the Edit Table button. The edit table dialog appears with the current output values for
each input percentage displayed.
each input percentage displayed.
4.
Enter new values for any and all levels. If an out of range value is entered, it is corrected
immediately to the nearest in range value. For old-style profiles, the range is from 0.0 to 2.0. For
new-style, the range is 0.0 to 100.0. The edit table dialog does not accept negative numbers.
immediately to the nearest in range value. For old-style profiles, the range is from 0.0 to 2.0. For
new-style, the range is 0.0 to 100.0. The edit table dialog does not accept negative numbers.
5.
Select OK to save the changes or Cancel to discard all changes.
6.
Select Save to overwrite the existing profile or Save As… to create a new profile.
•
The Save option is disabled when factory profiles are selected because factory profiles are
not editable.
not editable.
•
When using Save As…, enter a profile name for the new profile and then click Save.
•
The new profile name appears in the list of color profiles in the Set Active Profile dialog
box. Note that the new profile is automatically calibrated to the last time calibration was run
as it is created.
box. Note that the new profile is automatically calibrated to the last time calibration was run
as it is created.
7.
Select OK. ColorCal prompts to save changes or cancel if OK is selected before saving a
profile.
profile.
Creating Color Profile Sets
Color Profile Sets created using multiple calibrations can be saved with unique names. Each named
profile can be selected to use with a particular paper tray. The same profile can be used for multiple
trays.
profile can be selected to use with a particular paper tray. The same profile can be used for multiple
trays.
To create a profile set:
1.
Choose Edit Color Profile Sets from the ColorCal menu.
2.
Click Add.
Note!
No undo is supported in the edit table dialog.