Xerox DocuColor 12 Printer with Splash G620 用户指南
Splash G620 User Manual v2.0
114
Editing Curve Gains
PN: 0016964-0101
To edit a color profile, select Be an Expert in the Splash ColorCal window. The Splash ColorCal
edit window appears.
edit window appears.
Editing Curve Gains
1.
Select a color profile to edit from the Color profile popup menu.
2.
Select Highlights, Midtones, or Shadows at the bottom of the window to adjust a portion of the
curve, or Overall to adjust the entire curve.
curve, or Overall to adjust the entire curve.
3.
Select a color curve to edit from the floating color curve palette. The four color curves and the
Master curve are selectable.
Master curve are selectable.
4.
Move the slider to adjust the gain.
5.
Repeat Step 3. and Step 4. until all adjustments to all curves are complete. Each color’s
cumulative changes show in its own channel and in the master channel display.
cumulative changes show in its own channel and in the master channel display.
6.
Select Save to overwrite the existing profile or Save As… to create a new profile.
•
The Save option is disabled when factory profiles are selected because factory profiles are
not editable.
not editable.
•
When using Save As…, enter a profile name for the new profile and then click Save.
Note!
For v4.0-style profiles, the color curve editor plots density (from 0.0 to 2.0) against input
percentage (0% to 100%). For these profiles, the vertical axis is in units of Status-T less the paper
density. For new-style profiles, the vertical axis is represented as dot percentage from 0% to 100%.
For all profiles, the Horizontal axis is represented as dot percentage from 0% to 100%.
percentage (0% to 100%). For these profiles, the vertical axis is in units of Status-T less the paper
density. For new-style profiles, the vertical axis is represented as dot percentage from 0% to 100%.
For all profiles, the Horizontal axis is represented as dot percentage from 0% to 100%.
Color profile
Color
Locked
cannot
curve
be edited
profiles
palette
menu
Click to edit
control points
Click to enter
percentages
and densities
and densities
Note!
Factory installed profiles cannot be edited. ColorCal automatically prompts to save with a new
name any factory installed profile selected.
name any factory installed profile selected.