Xerox DocuColor 12 Printer with Splash G620 用户指南
PN: 0016964-0101
CopyCal
125
Chapter 11
Application Notes
CopyCal
CopyCal is a standalone application that creates profiles that allow the Splash server to emulate the
output of any color printer. CopyCal prints the CopyCal targets to the desired printer through Adobe
Acrobat. CopyCal scans each of the three targets in turn along with the Kodak Grayscale Strip.
CopyCal then processes the targets and produces a matching profile. The user names the profile and
CopyCal places the component pieces in the correct locations automatically.
output of any color printer. CopyCal prints the CopyCal targets to the desired printer through Adobe
Acrobat. CopyCal scans each of the three targets in turn along with the Kodak Grayscale Strip.
CopyCal then processes the targets and produces a matching profile. The user names the profile and
CopyCal places the component pieces in the correct locations automatically.
CopyCal Profiles
CopyCal profiles are a special class of profile that combine CMYK and RGB color correction into a
single selection. Selecting a CopyCal profile in the CMYK profile list overrides any RGB color
correction setting for that job. No CopyCal profiles are provided at install.
single selection. Selecting a CopyCal profile in the CMYK profile list overrides any RGB color
correction setting for that job. No CopyCal profiles are provided at install.
If a CopyCal profile is selected as the CMYK Press Profile, the RGB color matching associated with
the CopyCal profile is used instead of the RGB color matching selections.
the CopyCal profile is used instead of the RGB color matching selections.
CopyCal Calibration
1.
Launch the calibration application at the Splash Server. The CopyCal interface appears. The
copier must be running during the entire calibration procedure. The Splash Server application
and ColorCal can run at the same time.
copier must be running during the entire calibration procedure. The Splash Server application
and ColorCal can run at the same time.
2.
Print the CopyCal targets from Adobe Acrobat to the selected printer via the standard print
driver for that printer. The targets may be printed from any Macintosh or Windows client
system. The targets are numbered 2 to 4.
driver for that printer. The targets may be printed from any Macintosh or Windows client
system. The targets are numbered 2 to 4.
3.
Click Calibrate in the main calibration window. CopyCal prints a reference target, numbered 1.
4.
Place the Kodak Gray Scale target and the CopyCal target numbered 1 face down on the scanner
surface. Match the arrow on the target with the arrow on the back of the copier platen glass.
Position the target with the short edge of the paper along the left side of the copier platen. The
Gray Scale target also may be placed, but it is not necessary.
surface. Match the arrow on the target with the arrow on the back of the copier platen glass.
Position the target with the short edge of the paper along the left side of the copier platen. The
Gray Scale target also may be placed, but it is not necessary.
5.
Click Scan. CopyCal scans the Target and determines current color performance based on the
acquired image. If the wrong target was placed on the glass, CopyCal fails and displays a
message stating that it could not find registration marks. Restart the CopyCal procedure.
acquired image. If the wrong target was placed on the glass, CopyCal fails and displays a
message stating that it could not find registration marks. Restart the CopyCal procedure.
6.
Repeat Step 4. and Step 5. for targets 2, 3 and 4.
7.
CopyCal prompts for a profile name and saves the profile under that name. The CopyCal profile
created can now be selected as a custom CMYK profile. If the profile already exists, CopyCal
prompts to replace the profile. Cancelling allows the user to select a new name.
created can now be selected as a custom CMYK profile. If the profile already exists, CopyCal
prompts to replace the profile. Cancelling allows the user to select a new name.