Xerox DocuColor 12 Printer with Fiery X12 安装指南

If your network uses IPX/SPX protocols with Token Ring, configure at least one 
printer, one Fiery Print Server, and one Fiery Print Queue on the NetWare server as 
described in “Configuring a NetWare 3.x or 4.x server for printing” on page 5-4. You 
can configure up to eight bindery servers and one NDS tree connection to the Fiery. 
This total is the same whether the Fiery is connected by Token Ring, by Ethernet, or 
by both. For more information, see “Setting up an NDS connection” on page 5-6.

If your network uses TCP/IP protocols with Token Ring, configure at least one printer 
and one Fiery queue on a Windows NT server (see “Configuring a Windows NT 4.0 
server to support the Fiery” on page 5-9), or on a UNIX server (see “Setting up the 
Fiery on TCP/IP networks” on page 5-15).

Token Ring Setup on the Control Panel is similar to Ethernet Setup. From Network 
Setup, perform Port Setup, Protocol Setup, and Service Setup. The setups you need are 
summarized in the table on page 3-9.

Connect the Token Ring cable before doing Fiery Network Setup, so that the 

Token Ring card can configure itself properly.

Client setup is exactly the same as for IPX clients using Ethernet. See “Setting up 
NetWare Windows clients for printing” on page 5-7 for details.