Xerox DocuColor 12 Printer with Fiery X12 安装指南
2
2-8
Preparing for Fiery Setup
Fiery system software
The Fiery uses Windows NT Workstation system architecture to receive and process
jobs and send job data to the copier. To log in to the Fiery, enter
jobs and send job data to the copier. To log in to the Fiery, enter
Administrator
as the
user name, and enter the password.
N
OTE
:
Configuring and monitoring the Windows NT 4.0 functions from the Fiery
require the Fiery Advanced Controller Interface option. For more information, contact
your authorized service/support technician.
your authorized service/support technician.
Running on the Windows NT 4.0 Workstation is the following software unique to the
Fiery:
Fiery:
• Server—The Server is an independent software process that is started automatically
whenever Windows NT 4.0 is booted. As the central element of Fiery system
software, the Server process controls the spooling, rasterizing, and printing of jobs,
as well as job accounting (the Job Log), and job storage and retrieval.
software, the Server process controls the spooling, rasterizing, and printing of jobs,
as well as job accounting (the Job Log), and job storage and retrieval.
When the Server is not running, jobs cannot be received by the Fiery, job processing
cannot occur, job data cannot be transferred to the copier for printing, and the
Command WorkStation cannot connect to the Fiery. In the event that you need to
restart the Server process, right-click the FieryBar and choose Restart Fiery.
cannot occur, job data cannot be transferred to the copier for printing, and the
Command WorkStation cannot connect to the Fiery. In the event that you need to
restart the Server process, right-click the FieryBar and choose Restart Fiery.
• Command WorkStation—The Command WorkStation is the interface tool for the
Server. It provides a graphical means of viewing and controlling Server functions.
About Setup
Setup configures the Fiery to communicate with other devices and manage print jobs.
It is required the first time the Fiery is powered on after new system software is loaded,
or after server software is reinstalled. An initial Setup using default settings is adequate
for getting the Fiery to reach Idle status, but not for full functionality. When your
network or user printing environment changes, you can change Setup options
accordingly.
It is required the first time the Fiery is powered on after new system software is loaded,
or after server software is reinstalled. An initial Setup using default settings is adequate
for getting the Fiery to reach Idle status, but not for full functionality. When your
network or user printing environment changes, you can change Setup options
accordingly.
Initial Setup must be performed at the Fiery Control Panel. Configure at least Server
Setup, Network Setup, and Printer Setup, in that order. Afterwards, you can complete
or change most Setup options from a Windows computer using the
Command WorkStation or Fiery WebSetup.
Setup, Network Setup, and Printer Setup, in that order. Afterwards, you can complete
or change most Setup options from a Windows computer using the
Command WorkStation or Fiery WebSetup.