Xerox DocuColor 12 Printer with Fiery X12 安装指南
2
2-10
Preparing for Fiery Setup
Ensuring the copier connection
Complete the following steps before you configure the Fiery and the workstations that
will print to the Fiery. A service technician will have performed some initial
installation.
will print to the Fiery. A service technician will have performed some initial
installation.
T
O
PREPARE
FOR
F
IERY
CONFIGURATION
:
1.
Print a copier test page to make sure the copier is functioning normally.
2.
Turn off the copier and connect the interface cable from the copier to the Fiery.
3.
To confirm this connection, turn on the copier and the Fiery and print a Test Page from
the Fiery Control Panel.
the Fiery Control Panel.
To print a Test Page, press the Menu button on the Control Panel to display the
Functions menu. Choose Print Pages, and then Test Page.
Functions menu. Choose Print Pages, and then Test Page.
4.
With both the copier and the Fiery turned off, connect the network cable to the Fiery,
as described in Chapter 1.
as described in Chapter 1.
The network should already be installed and operational.
5.
Turn on the copier and then the Fiery.
6.
Prepare network servers to share Fiery user software and to enable networked users to
print to the Fiery.
print to the Fiery.
7.