Xerox DocuColor 12 Printer with Fiery X12 产品宣传页

The Fiery does not require maintenance. Beyond the routine requirements of servicing 
and maintaining the print engine and replenishing consumables there are a few things 
you can do to improve the overall performance of your system:

• Reduce unnecessary two-way communication.

If users notice that the server is frequently too busy to receive jobs, it may be because 
several users are running utilities that are updated often. Large numbers of remote 
users running Fiery Downloader or Fiery WebTools may have a significant effect on 
Fiery performance.

• Schedule the printing workload by checking job ticket information before printing. 

Print jobs with the same output and paper specifications together to minimize paper 
changes. Also, print routine jobs while you prepare to print jobs with special 
instructions or special media.

• Reduce unnecessary server connections at the Command WorkStation. If you use a 

second or third Fiery server on an occasional basis, performance will be improved if 
you log off when you are not using it.

• Avoid printing with the server 

Disk full

 warning. 

If you see this warning, delete jobs from the Queues or Archive windows that have 
been held for a long time and are not likely to be needed. Avoid this condition by 
deleting old jobs on a regular basis. The date associated with a job is the original date 
it was sent. As a last resort, you can use the Clear Server or the Clear command.

Turn copier power off
and on

Turn off the copier power switch, then turn it on again.

Warming Up . . .

This is a normal status message. The print engine is powering up. 
It will be ready for printing in a few minutes.

Waste dry ink full

The copier waste toner container is full of used toner. Replace the 
container with a new one according to the instructions in your 
copier manual. The Fiery will resume printing when you have 
replaced the waste toner container.

Yellow dry ink empty

Add Yellow toner.