Xerox DocuColor 12 Printer with Fiery X12 产品宣传页
1
1-2
Using the Control Panel
Activity light
The activity light indicates the current Fiery activity. If the light is:
Buttons
Solid red
An error has occurred causing the Fiery to be disabled.
Flashing red
There is an error causing printing to be disabled, but the
Fiery is capable of processing.
Fiery is capable of processing.
Solid green
The Fiery is idle.
Flashing green
The Fiery is processing or printing a job, or communicating
with a remote computer.
with a remote computer.
No light
The Fiery is off or starting up.
Line selection
buttons
buttons
There are four line selection buttons on the right side of the
Control Panel. Use these buttons to select the command
displayed on the corresponding line of the display window.
When a button is active, a special character (>) appears in the
display window next to the button.
Control Panel. Use these buttons to select the command
displayed on the corresponding line of the display window.
When a button is active, a special character (>) appears in the
display window next to the button.
Up and down
buttons
buttons
Use these buttons to scroll to different screens in multi-
screen lists, to select Setup options from a list of available
options, and to scroll alphanumeric characters.
screen lists, to select Setup options from a list of available
options, and to scroll alphanumeric characters.
Menu button
Press this button to view other screens. Under normal
operation, the Control Panel displays the Info, RIP, or Print
Status screen with information about the status of the Fiery.
If you press the Menu button, the Functions menu is
displayed and you can perform additional operations (see
page 1-5). If a job is processing or printing, press the Menu
button to cycle among the active screens.
operation, the Control Panel displays the Info, RIP, or Print
Status screen with information about the status of the Fiery.
If you press the Menu button, the Functions menu is
displayed and you can perform additional operations (see
page 1-5). If a job is processing or printing, press the Menu
button to cycle among the active screens.