Xerox DocuColor 12 Printer with Fiery X12 产品宣传页
1
1-5
Introduction to the Fiery Control Panel
Functions menu
The Functions menu provides many of the options available from the Command
WorkStation. You can choose the following commands from this menu:
WorkStation. You can choose the following commands from this menu:
Print Pages
Print special pages from the Fiery. You can print the following pages from the
submenu that appears:
submenu that appears:
PS Test Page /PCL Test Page
—A Test Page enables you to confirm that the Fiery is
properly connected to the copier, and provides color and grayscale samples to
troubleshoot problems with the copier or the Fiery. The following settings are
among those listed on the Test Page: Server Name, Printer Model, color settings,
calibration information, date and time the Test Page was printed.
troubleshoot problems with the copier or the Fiery. The following settings are
among those listed on the Test Page: Server Name, Printer Model, color settings,
calibration information, date and time the Test Page was printed.
Configuration
—Prints the Configuration page, which gives the current server and
device configuration. This page lists general information about the hardware and
software configuration of the Fiery, the current options for all Setup settings,
information about the current calibration, and the Ethernet and Token Ring
addresses of the Fiery.
software configuration of the Fiery, the current options for all Setup settings,
information about the current calibration, and the Ethernet and Token Ring
addresses of the Fiery.
Job Log
—Prints a log of the last 55 jobs. For information on the fields in the Job
Control Panel Map—
Prints the Control Panel Map, which is an overview of the
screens you can access from the Control Panel. For information about using these
screens to set up the Fiery, see the Configuration Guide.
screens to set up the Fiery, see the Configuration Guide.
Color Charts
—Prints samples of the RGB, CMY, and PANTONE colors available
from the Fiery.
PS Font List/PCL Font List
—Prints a list of all fonts currently on the Fiery hard disk.
Suspend Printing
Suspend communication between the Fiery and the copier. You must suspend
printing if you want to interrupt the current Fiery job so that you can use the
copier to make copies. Jobs continue to process on the Fiery. After you make the
copies, select
printing if you want to interrupt the current Fiery job so that you can use the
copier to make copies. Jobs continue to process on the Fiery. After you make the
copies, select
Resume Printing
to continue printing jobs from the Fiery.
Resume Printing
Resume communication between the copier and the Fiery after you have finished
making copies.
making copies.