Xerox DocuColor 12 Printer with Fiery X12 产品宣传页

Generally, you can leave the Fiery running all the time. This section describes how to 
shut down and restart the Fiery when necessary.

To start the Fiery, move the power switch on the back of the Fiery to the On position. 
If the copier is also powered off, power it on before powering on the Fiery.

Shut  Down

Shut down all Fiery activity in the correct manner and then restart. You should use 
this option instead of the power switch on the back of the Fiery. The following 
options are available from the submenu that appears:

Restart Server

—Restarts the server without shutting down the Fiery hard disk.

Shut Down System

—Shuts down the Fiery hard disk.

Reboot System

—Restarts the system after shutting down the Fiery hard disk.

Clear  Server

Clear all jobs in all server queues as well as all jobs archived on the Fiery hard disk, 
the index of archived jobs (in the Archive window), all FreeForm masters, the index 
of FreeForm masters (in the FreeForm window), and the Job Log. Check with your 
administrator or operator before choosing Clear Server. If an Administrator password 
has been set, you must enter it to access Clear Server.

Run Setup

Enter the Setup menu and change Setup option settings. See the Configuration 
Guide for more details.

Run Diagnostics

This function is provided for service representatives only. Contact your authorized 
service/support technician for information about running diagnostics.

Calibration

Calibrate the Fiery using AutoCal. For more information, see the Color Guide. If an 
Administrator password has been set, you must enter it to access Calibration.