Xerox ColorQube 8870 用户指南
Maintenance
ColorQube 8570/8870 Color Printer
User Guide
137
Moving and Repacking the Printer
This section includes:
•
•
•
CAUTION:
Parts of the printer are hot. To avoid damage to the printer, allow the ink to solidify
and the printhead to cool. To cool the printer quickly, run the Shutdown for Moving Printer
procedure on the printer control panel. The Shutdown for Moving Printer routine requires that you
remove the maintenance kit and waste tray. For details, see
procedure on the printer control panel. The Shutdown for Moving Printer routine requires that you
remove the maintenance kit and waste tray. For details, see
Precautions for Moving the Printer
Follow these guidelines to avoid injuring yourself or damaging the printer:
•
Keep the printer level. Tilting the printer can cause the ink to spill inside.
•
Use the Shutdown for Moving Printer option on the printer control panel for best results. For
details, see
details, see
•
Always allow the printer to cool before it is moved to avoid ink spills that can damage the printer.
WARNING:
Parts of the printer may be hot. To avoid personal injury, allow 30 minutes for it to
cool down before moving or packing the printer. This allows the ink to solidify and the printhead
to cool.
to cool.
•
Always turn off the printer using the power switch located under I/O door E on the rear right side
of the printer. Unplug all cables and cords. Never turn off the printer by pulling the power cord or
using a power-strip with an on/off switch.
of the printer. Unplug all cables and cords. Never turn off the printer by pulling the power cord or
using a power-strip with an on/off switch.