Zanussi ZOB10401WK 用户手册

Close the oven door

halfway to the first

opening position.

Then pull forward and

remove the door from

its seat.

Put the door on a soft

cloth on a stable

surface.

Release the locking

system to remove the

internal glass panel.

90°

Turn the two

fasteners by 90° and

remove them from

their seats.

2

1

First lift carefully and

then remove the

glass panel.

Clean the glass panel with water and soap. Dry

the glass panel carefully.
When the cleaning is completed, install the

glass panel and the oven door. Do the above

steps in the opposite sequence.

The screen-printing zone must face the inner

side of the door. Make sure that after the

installation the surface of the glass panel frame

on the screen-printing zones is not rough when

you touch it.
Make sure that you install the internal glass

panel in the seats correctly.

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

Refer to Safety chapters.